BLUELINE is a dynamically reconfigurable processing system in modular construction.
The arrangement of the container-based processing units (modules) is individually adapted to the required treatment process. We can fall back on an an extensive product rangewhich covers almost all established process steps of the dry mechanical-physical residue treatment - all from one supplier and coordinated with each other.
The decentralized IT-based control takes place wirelessly by means of tablet.This completely new type of system control enables reproducible processing successes for different material flows. Machine parameters that have been established for a preparation process are available at any time and are set fully automatically by the system - depending on the material flow being prepared. In addition to the intelligent control system, BLUELINE also includes complete conveying and dosing technology.
We will provide you with further information about BLUELINE step by step until our official market launch in 2021. Visit us again and get to know all our modules and further details. With our newsletter you will receive all information conveniently in your inbox.
The product range covers almost all established process steps of dry mechanical-physical residue treatment. An all-in-one solution with conveyor technology and control on board.
The modular design allows an individual process arrangement adapted to the input material as well as a simple expansion of the plant.
All modules are designed as 20 foot containers. This design allows an uncomplicated use of common means of transport such as ship, train and truck.
The IT-based control system supports the user during setup, configuration and commissioning and enables ongoing optimization and cross-location monitoring.
BLUELINE supports both centralized and decentralized processing of industrial waste materials. All that is needed is a power supply - which is efficient and sustainable.
With the BLUEBOX, BLUELINE can be connected downstream to an existing system.
BLUELINE enables economical processing even with frequently changing, different and small batches of industrial waste materials. We are constantly developing our modules even further. Thus your plant is always state-of-the-art.
More information about the potential of BLUELINE will be published here in the upcoming weeks. Visit us again, or register to receive our newsletter.
With BLUELINE, you can rely on an extensive product range that includes almost all established process steps of dry mechanical-physical residue treatment Everything from one source, coordinated with each other and with your treatment process. Modules with an hourglass symbol are currently still under development.
SHRED IMPACT
Impact shredder for efficient disintegration of composites.
SHRED SINGLE
Cutting shredding for optimal pre-treatment for the subsequent sorting technology.
SCREEN BASIC
Single-deck linear vibrating screen with four longitudinally tensioned screen linings. A material switch enables optional operation between one or two screening stages with only one screen deck.
SCREEN DOUBLE
Two-deck linear motion screen with 3D screening panel in the upper deck and resonance-excited PU screen mats in the lower deck. This combination enables an almost blockage-free screening of difficult feed material.
EDDY ONE
Eddy current sorter with static magnet system for particle size range from 0.5 to 8 mm. Punctual force effect enables highest separation efficiency for fine particles.
EDDY ACTIVE
Eddy current sorter with eccentric pole wheel for sorting in particle size range from 2 to 200 mm. A strong magnet system with up to 500 mT at the belt surface enables high separation efficiency.
SORT AIR
Air separation unit double station with integrated feed bin for precise density sorting of the feed material in the particle size range from 0.1 to 25 mm.
SORT CYCLONE
Proven separation technology for the separation of light materials from the feed material.
SORT FLUID
Innovative dry density sorting in the particle size range from 20 to 80 mm for sorting non-ferrous metal mixtures.
SENSOR IDENTIFY
Sensor-based sorter with integrated compressed air preparation. A combination of a colour camera system and an induction bar enables concentrations with the highest recyclable material levels.
SENSOR UNCOVER
Sensor-based sorter with integrated compressed air preparation. A combination of X-ray transmission and colour camera system allows concentrations with highest recyclable material levels.
Â
SUPPORT EXTRACT
Extraction module tailored to the needs of BLUELINE for reliable process air routing and reduction of dust emissions.
SUPPORT EXTRACT +
Extraction module with flameless explosion suppression system, tailored to the needs of BLUELINE for safe process air routing and reduction of dust emissions.
SUPPORT MOVER
Floor conveyors for easy manoeuvring and positioning of BLUELINE modules during the assembly, conversion and dismantling of systems.
SUPPORT SERVICE
Self-sufficient gantry crane solution to facilitate set-up work such as changing screen linings or maintenance work.
SUPPORT STORAGE
Storage module for the storage and safe transportation of external belt conveyors.
Â
CONVEY L600
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 5000 mm | Conveying width: 600 mm
CONVEY L800
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 5000 mm | Conveying width: 800 mm
CONVEY S600
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 2500 mm | Conveying width: 600 mm
CONVEY S800
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 2500 mm | Conveying width: 800 mm
BLUE BOX
For control- and safety-related integration of existing upstream machines, such as shredders, into the BLUELINE system.
BLUE PANEL
A "rugged tablet" suitable for industrial use is used to control and monitor the entire BLUELINE system.
SHRED IMPACT
Impact shredder for efficient disintegration of composites.
SHRED SINGLE
Cutting shredding for optimal pre-treatment for the subsequent sorting technology.
SCREEN BASIC
Single-deck linear vibrating screen with four longitudinally tensioned screen linings. A material switch enables optional operation between one or two screening stages with only one screen deck.
SCREEN DOUBLE
Two-deck linear motion screen with 3D screening panel in the upper deck and resonance-excited PU screen mats in the lower deck. This combination enables an almost blockage-free screening of difficult feed material.
EDDY ONE
Eddy current sorter with static magnet system for particle size range from 0.5 to 8 mm. Punctual force effect enables highest separation efficiency for fine particles.
EDDY ACTIVE
Eddy current sorter with eccentric pole wheel for sorting in particle size range from 2 to 200 mm. A strong magnet system with up to 500 mT at the belt surface enables high separation efficiency.
SORT AIR
Air separation unit double station with integrated feed bin for precise density sorting of the feed material in the particle size range from 0.1 to 25 mm.
SORT CYCLONE
Proven separation technology for the separation of light materials from the feed material.
SORT FLUID
Innovative dry density sorting in the particle size range from 20 to 80 mm for sorting non-ferrous metal mixtures.
SENSOR IDENTIFY
Sensor-based sorter with integrated compressed air preparation. A combination of a colour camera system and an induction bar enables concentrations with the highest recyclable material levels.
SENSOR UNCOVER
Sensor-based sorter with integrated compressed air preparation. A combination of X-ray transmission and colour camera system allows concentrations with highest recyclable material levels.
SUPPORT EXTRACT
Extraction module tailored to the needs of BLUELINE for reliable process air routing and reduction of dust emissions.
SUPPORT EXTRACT +
Extraction module with flameless explosion suppression system, tailored to the needs of BLUELINE for safe process air routing and reduction of dust emissions.
SUPPORT MOVER
Floor conveyors for easy manoeuvring and positioning of BLUELINE modules during the assembly, conversion and dismantling of systems.
SUPPORT SERVICE
Self-sufficient gantry crane solution to facilitate set-up work such as changing screen linings or maintenance work.
SUPPORT STORAGE
Storage module for the storage and safe transportation of external belt conveyors.
CONVEY L600
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 5000 mm | Conveying width: 600 mm
CONVEY L800
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 5000 mm | Conveying width: 800 mm
CONVEY S600
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 2500 mm | Conveying width: 600 mm
CONVEY S800
A belt conveyor which can be used universally within the BLUELINE with cleats and corrugated edge for safe material transport at 35° incline. Conveying length: 2500 mm | Conveying width: 800 mm
BLUE BOX
For control- and safety-related integration of existing upstream machines, such as shredders, into the BLUELINE system.
BLUE PANEL
A "rugged tablet" suitable for industrial use is used to control and monitor the entire BLUELINE system.
By registering for our newsletter, you will receive further information on BLUELINE exclusively and without obligation.
You can rely on BLUELINE: we develop and produce in Waidhofen an der Ybbs in Austria. Long-standing and established partners guarantee the best technology behind our system.
In addition to our industrial partners, we rely on cooperation with established research institutions.
We have set ourselves the goal of using our technology to contribute to the preservation of our planet by increasing the global importance of recycling.
However, since this does not work by good will alone, it requires first-class solutions that also bring economic benefits. This is exactly what we offer with BLUELINE.
LINETECHNOLOGY GmbH was founded in 2019 out of a research and development facility of IFE Aufbereitungstechnik GmbH.
Our world is in a constant state of change which is, however, more and more strongly influenced by humans, driven by economic interests and the resulting overexploitation of our natural resources. Terms such as "Circular Economy" or "Cradle to Cradle" describe visions and objectives to prevent our planet from being burdened even more by our consumer society.
For decades, IFE Aufbereitungstechnik GmbH has been developing and producing innovative machines in the field of conveying, screening, sealing and magnet technology, thus making a decisive contribution to achieving these goals in the construction of new stationary recycling units.
However, in order to enable "Circular Economy" and "Cradle to Cradle" on a global scale, a technology that makes both decentralized recycling and the processing of small quantities of industrial residual fractions economically feasible is also needed apart from central stationary processing plants.
Conceptually and under the patronage of IFE Aufbereitungstechnik GmbH, this new type of flexible processing became more and more extensive as the project progressed. Its complete implementation also made the implementation of separation technologies from other companies and thus cooperation with them inevitable.
The resulting contradiction to the existing company strategy of IFE Aufbereitungstechnik GmbH, as well as the market and the close-to-production manufacturing requirements necessary for the implementation were the decisive factors for the decision to spin off BLUELINE and the project team concerned into an independent company, LINETECHNOLOGY GmbH.
LINETECHNOLOGY GmbH will establish itself on the market as a sister company of IFE Aufbereitungstechnik GmbH, completely independent and without interdependencies, and offers modular, dynamically reconfigurable, container-based processing plants under the name BLUELINE.
You prefer personal contact?
We look forward to hearing from you and will be happy to find out together how BLUELINE can be optimally used in your process.
CEO
+43 (0) 676 847 172 501
christian.karl@line-technology.com
Head of Sales & Marketing
+43 (0) 676 847 172 201
lukas.seisenbacher@line-technology.com
Head of Research & Development
+43 (0) 676 847 172 601
georg.doninger@line-technology.com
Sales Agent
+49 (0) 171 97 415 16
bernd.breuing@line-technology.com
Of course you can also send us a message - we will contact you reliably.
You can also use our social media channels to stay informed about new BLUELINE developments.
LINETECHNOLOGY GmbH
Patertal 20
3340 Waidhofen an der Ybbs, Austria - Europe